IO Instruments released Kalyke

IO Instruments released Kalyke, a dual function generator module for eurorack.

Features:

LFO section
Waveform: controlled/morphed manually via potentiometer or CV
Morphs from Pulse (20-50-90%) -> Sinus (720°) -> Ramp (720°) -> Triangle (680°)
Tempo: controlled via potentiometer or CV
Center of potentiometer at: 4Hz +/- 8 Oktaves
Repeats: controlled via potentiometer and reset in
Can be adjusted from 1-14 repeats and endless loop (takes effect after reset in)
ADSR-Mix: ADSR can be mixed onto LFO with potentiometer
Sample and Hold: LFO can be switched into S&H mode
Offset: can be toggled btw -5V to +5V and 0 to +10V via switch
Input: 1xCV for waveform, 1xCV for tempo, 1xReset
Output: LFO has one positive and one negative CV output
Manual Trigger: one button to reset LFO (shared with ADSR)
ADSR section
Curve: continuous exponentiell to linear response, controlled via potentiometer
Ratchets: 16 different multi repeats of attacks, controlled via Attack and Decay sliders
Loop: loop mode from Attack to Release, controlled via switch
Freeze: all settings get freezes to keep exact positions
Control: 4x30mm faders to control A, D, S and R segments
Manual Trigger: one button to reset ADSR (shared with LFO)
Output: ADSR has one positive and one negative CV output, further one trigger out at end of attack,
one trigger out at end of decay
Input: 1xGate in (>1V), four modulation inputs to control A, D, S, and R segments (0-5V)